Proceed as follows:
1.
After loading laundry and detergent,
press the On/Off button for some
seconds to activate the appliance.
2.
Set the NonStop 60min programme
by means of the programme dial.
The indicators
and
appear on
the display.
3.
Touch the Inicio/Pausa button to
start the programme.
Non-automatic wash&dry
programmes
In some washing programmes, you can
combine Modo - Lavar and Modo - Secar
for running a complete wash&dry
programme.
Proceed as follows:
1.
Press the On/Off button for some
seconds to activate the appliance.
2.
Load the laundry one item at a time.
3.
Put the detergent and the additives
in the appropriate compartment.
4.
Turn the programme dial to the
washing programme. The appliance
defaults to the washing only mode
and the indicator of the Modo - Lavar
button is on. The display shows the
default temperature and spin. If
necessary, change them according to
your laundry. The display also shows
the maximum recommended load for
washing phase.
5.
Set the desired options, if there are
available.
6.
Tap on the Modo - Secar button to
activate also the drying function.
Both indicators of the Modo - Lavar
and Modo - Secar buttons are on.
The indicators
and appear on
the display. The display also shows
the maximum recommended load for
a washing and drying programme
(e.g. 4 kg for cottons).
11.2
Washing and Drying -
Automatic levels
1.
Tap on the Auto Dry button
repeatedly until the display shows
the required dryness level. The
indicators in the display illuminate
accordingly:
a.
Iron dry
: for cotton items;
b.
Cupboard dry
: for cotton and
synthetic items;
c.
Extra dry
: for cotton items.
The time value on the display is the
duration of both cycles washing and
drying, calculated on a default load
size.
To have a good drying by
using less energy and in a
shorter time, the appliance
does not let you set a too
low spin speed for the items
to be washed and dried.
2.
Touch button Inicio/Pausa to start
the programme. The ProSense
estimation starts.
In the display the door locked
indicator comes on.
The display also shows the remaining
programme time.
11.3
Washing and Timed
Drying
1.
Tap on the Tiempo/Tempo sec.
button repeatedly to set the desired
time value (see the "Timed drying"
table the "Programmes" chapter).
The drying level indicator goes off
and the indicator
comes on.
Each time you tap on this button the
time value increases by 5 minutes. The
display shows the set new time value.
2.
Touch the Inicio/Pausa button to
start the programme. The ProSense
estimation starts.
In the display the door locked
indicator comes on.
The display also shows the remaining
programme time.
11.4
At the end of the drying
programme
• The appliance stops automatically.
• The acoustic signals operate (if they
are active).
• In the display
comes on.
ENGLISH
35
