If you set a programme or an
option that ends with water
in the drum, the Stand-by
function doesn't deactivate
the appliance to remind you
to drain the water.
13. DAILY USE - WASHING & DRYING
WARNING!
Refer to Safety chapters.
This appliance is an
automatic washer dryer.
13.1 Complete wash&dry
programmes
Non-automatic wash&dry
programmes
In some washing programmes, you can
combine Wassen/Lavage and Drogen/
Séchage mode for running a complete
wash&dry programme.
Proceed as follows:
1. After loading laundry and detergent,
press the Aan/Uit/Marche/Arrêt
button for some seconds to activate
the appliance.
2. Load the laundry one item at a time.
3. Put the detergent and the additives in
the appropriate compartment.
4. Turn the programme dial to the
washing programme. The display
shows the default temperature and
spin. If necessary, change them
according to your laundry. The
display also shows the maximum
recommended load for washing
phase.
5. Set the desired options, if there are
available.
6. Touch the Modus/Mode button once
to activate also the drying function.
The Wassen/Lavage and Drogen/
Séchage indicators come on. The
indicators
and
appear on
the display. The display also shows
the maximum recommended load for
a washing and drying programme
(e.g. 5 kg for cottons).
7. Now, you can choose an automatic
drying level or a specific timed
drying.
13.2 Washing and Drying -
Automatic levels
1. Tap on the Droogtegraad/Séchage
button repeatedly until the display
shows the required dryness level.
The indicators in the display
illuminate accordingly:
a.
Iron dry: for cotton
items;
b.
Cupboard dry: for
cotton and synthetic items;
c.
Extra dry: for cotton
items.
The time value on the display is the
duration of both cycles washing and
drying, calculated on a default load
size.
To have a good drying by
using less energy and in a
shorter time, the appliance
does not let you set a too
low spin speed for the items
to be washed and dried.
2. Touch button Start/Pauze/Départ/
Pause to start the programme. The
PROSENSE estimation starts.
In the display the door locked
indicator goes on, the indicator of the
running phase starts flashing.
The display also shows the remaining
programme time.
www.aeg.com
34
