AEG L7FEC946U Page 18 User Manual Download

Page: 18 / 44

• Press the On/Off button for a few

seconds to activate or the deactivate

the appliance.

• Turning the programme dial in

another position.

A small laundry load helps to

reach better results.

8.8 Delay Start

With this option you can delay the start of

a programme in a more convenient time.
Touch the button repeatedly to set the

required delay. The time increases by

steps of 30 minutes up to 90' and from 2

hours up to 20 h.
After touching the Start/Pause button,
the display shows the indicator and

the selected delay time and the

appliance begins the countdown.

8.9 Time Save

With this option you can decrease the

programme duration.
• If your laundry is normally or lightly

soiled, it may be advisable to shorten

the washing programme. Touch this

button once to decrease the duration.

• In case of smaller load, touch this

button twice to set an extra quick

programme.

The display shows the indicator

This option can also be used

to shorten the steam

programme duration.

8.10 Skipping phase button

(Options)

By touching this button you can set:

• Rinse only at first touch. The washing

programme starts from the rinsing

phase by skipping the wash phase.

All set options (except

permanent extra rinse)

are deselected

automatically.

• Spin only at second touch. The

appliance skips wash and rinse

phase.

• Drain only at third touch. The

appliance performs only the drain

phase.

At firth touch the appliance

proposes the default setting

of the washing programme

again.

8.11 Pods®

Touch this button to activate or

deactivate the Pods® option .
When activated the relevant indicator is

on.
Follow the Pods manufacturer's dosage

and storage recommendations.
Put maximum two tablets or single-dose

detergents in the Pods® compartment in

the detergent dispenser drawer.
The option remains active also for next

cycles until it is deactivated and if it is

selectable with the set programme.

8.12 Start/Pause

Touch the Start/Pause button to start,

pause the appliance or interrupt a

running programme.

9. PROGRAMMES

9.1 Programme Chart

Washing programmes

Programme

Programme description

Washing programmes

www.aeg.com

Summary of Contents for L7FEC946U













































Search results

Summary of Contents for L7FEC946U

Reviews:

Related manuals for L7FEC946U

Brands by name

Popular brands

AEG L7FEC946U, User Manual

Search results

Summary of Contents for L7FEC946U

Reviews:

Related manuals for L7FEC946U

Brands by name

Popular brands