background image

CAUTION!

Make sure that no laundry

stays between the seal and

the door. There is a risk of

water leakage or damage to

the laundry.

CAUTION!

Washing heavily oiled,

greasy stains could cause

damage rubber parts of the

washing machine.

12.3 Filling the detergent and

additives

 - Compartment for detergent pods

(Max 2 pods). When using detergent tab‐

lets, make sure that the Pods option is ac‐

tivated.

 - Compartment for prewash phase

an soak programme (powder detergent

only).

 - Compartment for washing phase

(powder detergent only).

Make sure that the Pods

option is deactivated when

using this compartment.

If using liquid detergent, re‐

member to insert the con‐

tainer for liquid detergent

.

 - Compartment for fabric softener

and other liquid treatments (fabric condi‐

tioner, starch).

 - Always follow the instructions that

you find on the packaging of the detergent

products, but we recommend that you do

not exceed the maximum indicated level
(

). This quantity will however guaran‐

tee the best washing results.

After a washing cycle, if

necessary, remove any

detergent residue from the

detergent dispenser.

Proceed as follows

1. Open the detergent dispenser.

2. If a prewash phase is set, put the

powder detergent in compartment

.

3. For main wash, chose the proper

compartment depending on the type

of detergent:

a) Put the powder detergent in the
compartment 

.

www.aeg.com

26

Summary of Contents for L7FE706CBV

















































Reviews: