3.
Remove the internal film.
4.
Open the door and remove the
polystyrene piece from the door seal
and all the items from the drum.
5.
Carefully put down the appliance
with the rear side on it.
6.
Put the front polystyrene packaging
element on the floor under the
appliance.
Make sure not to
damage the hoses.
7.
Remove the polystyrene protection
from the bottom.
1
2
8.
Pull up the appliance in vertical
position.
9.
Remove the power supply cable and
the drain hose from the hose holders.
It is possible to see
water flowing from the
drain hose. This is due to
the testing with water of
the appliance in factory.
10.
Remove the three bolts by using the
key supplied with the appliance.
www.aeg.com
6
Summary of Contents for L7FBE68SC
Page 1: ...USER MANUAL EN User Manual Washing Machine L7FBE68SC ...
Page 38: ...www aeg com 38 ...
Page 39: ...ENGLISH 39 ...
