AEG L7FBE49BSA User Manual Download Page 37

Page: 37 / 60

CAUTION!

Make sure that no laundry

stays between the seal and

the door. There is a risk of

water leakage or damage to

the laundry.

CAUTION!

Washing heavily oiled,

greasy stains could cause

damage rubber parts of the

washing machine.

12.3 Using detergent and

other treatments

If both AutoDose tanks are enabled in

the set programme, detergent and fabric

softener are automatically loaded.
If one of the AutoDose tank or both

are disabled (OFF) in the set

programme, proceed by manually filling

the product in the proper compartment.

12.4 Setting a programme

If you wish to change the

automatic detergent or fabric

softener dosage, enter the

AutoDose configuration

mode before proceeding

with any programme setting.

The configuration mode may

cancel temporary settings.

Please refer to "AutoDose

configuration mode"

paragraph in "The AutoDose

Technology (Autodosing)"

chapter.

1. Turn the programme dial to select the

desired washing programme. The

related programme indicator comes

on.

The indicator of the Start/Pause

button flashes.

The display shows an indicative

programme duration, the maximum

declared load for the set programme

(only for a few seconds), the default

temperature, the default spin speed and

the washing phase indicators (when

available).

2. To change the temperature and/or

the spin speed, touch the related

buttons.

3. If desired, set one or more options by

touching the related buttons. The

related indicators come on in the

display and the given information

changes accordingly.

In case a selection is not

possible, no indicator

comes on and an acoustic

signal sounds.

12.5 Starting a programme

WARNING!

Make sure that the detergent

dispenser is firmly closed,

otherwise programme won't

start.

Touch the Start/Pause

button to start

the programme.

The related indicator stops flashing and

stays on.

In the display, the indicator of the

operating phase starts flashing.

The programme starts, the door is

locked. The display shows the indicator

The drain pump can operate

shortly before the appliance

fills water.

12.6 Starting a programme

with the delay start

1. Touch this repeatedly until the

display shows the desired delay time.
The indicator comes on.

2. Touch the Start/Pause

button.

ENGLISH

Summary of Contents for L7FBE49BSA





























































Search results

Summary of Contents for L7FBE49BSA

Reviews:

Related manuals for L7FBE49BSA

Brands by name

Popular brands

AEG L7FBE49BSA, User Manual

Search results

Summary of Contents for L7FBE49BSA

Reviews:

Related manuals for L7FBE49BSA

Brands by name

Popular brands