AEG L6WEJ841N, User Manual

Page: 18 / 44

Programme
Default temperature
Temperature range
Maximum load
Reference spin
speed
Programme description
(Type of load and level of soiling)
Synthetics
3 kg Drying programme for synthetics items
and mixed fabrics.
Cottons
4 kg Drying programme for cotton items.
NonStop 1h/1kg
30°C
40°C - 30°C
1 kg
1200 rpm
Complete programme composed of a wash‐
ing phase and of a drying phase for a small
load of mixed shirts.
Steam
1 kg Cotton, synthetic and mixed items. Spe‐
cial steam cycle without washing that can
be used to prepare your dried laundry for
ironing or refresh garments worn once. This
programme reduces creases, odours and
relaxes the fibres. Do not use any deter‐
gent.
1) According to Commission Regulation EU 2019/2023. This programme at default temperature and
spin speed, in washing only mode, with rated capacity 8 kg is able to clean normally soiled cotton laundry
declared to be washable at 40 °C or 60 °C, together in the same cycle.
For the reached temperature in the laundry, the programme duration and other data,
please refer to 'Consumption Values' chapter.
The most efficient programmes in terms of energy consumption are generally those that
perform at lower temperatures and longer duration.
2) Cottons energy saving programme. This programme at 60ºC with a load of 8 kg is the reference
programme for data entered in the energy label, in compliance with 96/60/EC Directive. Set this pro‐
gramme to have a good washing results and decrease the energy consumption. The time of the washing
programme is extended.
3) According to Commission Regulation EU 2019/2023. This programme at default temperature and
spin speed, in washing and drying mode, with rated capacity 4 kg and with Cupboard dry level performs
the wash and dry cycle able to clean normally soiled cotton laundry declared to be washable at 40 °C or
60 °C, together in the same cycle and, after drying phase, the laundry can be immediately stored in a
cupboard.
4) This programme is the drying reference programme for data entered in the energy label on compliance
with 96/60/EC Directive. The test performance, in accordance with EN 50229, must be carried out with a
FIRST drying load of the maximum declared drying capacity (load composition according to EN61121) by
setting the AUTOMATIC CUPBOARD DRY for Eco 40-60 programme. The SECOND drying load with the
residual load must be tested by setting the AUTOMATIC CUPBOARD DRY for Eco 40-60 programme.
5) During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the drum doesn't
rotate or doesn't rotate properly, but this is normal for this programme.
6) Set the spin speed. Make sure it is suitable for the type of fabric being washed. If you set the No Spin
option then only the drain phase is available.
www.aeg.com 18