
Problem
Possible solution
After the washing cycle,
there are some deter-
gent residues in the dis-
penser drawer.
• Make sure that the flap is in the correct position (left for
powder detergent - right for liquid detergent).
• Make sure you have used the detergent dispenser accord-
ing the indications given in this user manual.
After the check, activate the appliance. The programme continues from the point of
interruption.
If the problem occurs again, contact the Authorised Service Centre.
If the display shows other alarm codes. Deactivate and activate the appliance. If the
problem continues, contact the Authorised Service Centre.
14.
TECHNICAL DATA
Dimension
Width/ Height/ Depth/
Total depth
400 mm/ 890 mm/ 600 mm/ 600 mm
Electrical connection
Voltage
Overall power
Fuse
Frequency
230 V
2200 W
10 A
50 Hz
Level of protection against ingress of solid particles
and moisture ensured by the protective cover, ex-
cept where the low voltage equipment has no pro-
tection against moisture
IPX4
Water supply pressure
Minimum
Maximum
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Water supply
1)
Cold water
Maximum Load
Cotton
7 kg
Energy Efficiency Class
A+++
Spin Speed
Maximum
1300 rpm
1)
Connect the water inlet hose to a water tap with a 3/4'' thread.
15.
CH
GUARANTEE
Customer Service Centres
Point of Service
Industriestrasse 10
5506 Mägenwil
Le Trési 6
1028 Préverenges
Via Violino 11
6928 Manno
www.aeg.com
26
Summary of Contents for L6TB61379
Page 51: ...1 2 3 4 5 DEUTSCH 51 ...
Page 57: ...DEUTSCH 57 ...
Page 58: ...www aeg com 58 ...
Page 59: ...DEUTSCH 59 ...