manualshive.com logo in svg

AEG L6FSI844, User Manual, Page: 28 / 36

Share
Download
AEG L6FSI844 User Manual Download Page 28

13.2 

Possible failures

Problem

Possible solution

The programme does

not start.

• Make sure that the mains plug is connected to the mains

socket.

• Make sure that the appliance door is closed.
• Make sure that there is no damaged fuse in the fuse box.
• Make sure that the Inicio/Pausa 

has been touched.

• If the delay start is set, cancel the setting or wait for the end

of countdown.

• Deactivate the Child Lock function if it is on.

The appliance does not

fill with water properly.

• Make sure that the water tap is open.
• Make sure that the pressure of the water supply is not too

low. For this information, contact your local water authority.

• Make sure that the water tap is not clogged.
• Make sure that the inlet hose has no kinks, damages or

bends.

• Make sure that the connection of the water inlet hose is

correct.

The appliance fills with
water and drains immedi-
ately

• Make sure that the drain hose is in the correct position. The

hose may be positioned too low. Refer to "Installation in-
struction".

The appliance does not
drain the water.

• Make sure that the sink spigot is not clogged.
• Make sure that the drain hose has no kinks or bends.
• Make sure that the drain filter is not clogged. Clean the fil-

ter, if necessary. Refer to "Care and cleaning".

• Make sure that the connection of the drain hose is correct.
• Set the drain programme if you set a programme without

drain phase.

• Set the drain programme if you set an option which ends

with water in the tub.

The spin phase does not
operate or the washing
cycle lasts longer than
usual.

• Set the spin programme.
• Make sure that the drain filter is not clogged. Clean the fil-

ter, if necessary. Refer to "Care and cleaning".

• Adjust manually the items in the tub and start the spin

phase again. This problem may be caused by balance prob-
lems.

There is water on the
floor.

• Make sure that the couplings of the water hoses are tight

and there is not water leakages.

• Make sure that the water inlet hose and the drain hose have

no damages.

• Make sure you use the correct detergent and the correct

quantity of it.

www.aeg.com

28

Summary of Contents for L6FSI844





































Reviews:

No comments