AEG L6FQW942G User Manual Download Page 4

Children between 3 and 8 years of age and persons

with very extensive and complex disabilities shall be

kept away from the appliance unless continuously

supervised.

Children of less than 3 years of age should be kept

away from the appliance unless continuously

supervised.

Do not let children play with the appliance.

Keep all packaging away from children and dispose of

it appropriately.

Keep detergents away from children.

Keep children and pets away from the appliance when

the door is open.

If the appliance has a child safety device, it should be

activated.

Children shall not carry out cleaning and user

maintenance of the appliance without supervision.

1.2 General Safety

Do not change the specification of this appliance.

This appliance is intended to be used in household

and similar applications such as:

staff kitchen areas in shops, offices and other

working environments;

by clients in hotels, motels, bed & breakfast and

other residential type environments;

areas for communal use in blocks of flats or in

launderettes.

The appliance maximum load is 9 kg. Do not exceed

the maximum load of each programme (refer to the

“Programmes” chapter).

The operating water pressure at the water entry point

from the outlet connection must be between 0.5 bar

(0.05 MPa) and 10 bar (1.0 MPa).

The ventilation opening in the base must not be

covered by a carpet, mat, or any floor covering.

www.aeg.com

4

Summary of Contents for L6FQW942G

























































Reviews: