AEG L6FBQ94GS, User Manual

Page: 38 / 60

12.9 Cancelling a running
programme
1. Press the button Aan/Uit - Marche/
Arrêt to cancel the programme and to
deactivate the appliance.
2. Press the button Aan/Uit - Marche/
Arrêt again to activate the appliance.
Now, you can set a new washing
programme.
If the ProSense phase is
already carried out and the
water filling is already
started, the new programme
starts without repeating the
ProSense phase. The water
and the detergent are not
drained out in order to avoid
waste. The display shows
the maximum duration of the
programme, updating it
about 20 minutes after the
starting of the new
programme.
12.10 Opening the door -
Adding garments
While a programme or the delay start
operates, the appliance door is locked.
If the temperature and level
of the water in the drum are
too high and/or the drum still
rotates you cannot open the
door.
1. Touch the Start/Pauze - Départ/
Pause button.
In the display the related door lock
indicator goes off.
2. Open the appliance door. If
necessary, add or remove the items.
3. Close the door and touch the Start/
Pauze - Départ/Pause button.
The programme or the delay start
continues.
4. The door can be opened when the
programme is complete. You may
also set a spinning or draining
programme/option and than press
Start/Pauze - Départ/Pause button. If
the spin and drain programmes are
not available in the programme dial,
they can be set via App.
12.11 End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active).
In the display all washing phase
indicators become steady and the time
area shows .
The indicator of the Start/Pauze - Départ/
Pause button goes off.
The door unlocks and the indicator
goes off.
1. Press the Aan/Uit - Marche/Arrêt
button to deactivate the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
show the end of the last
selected programme. Turn
the programme dial to set a
new cycle.
2. Remove the laundry from the
appliance.
3. Make sure that the drum is empty.
4. Keep the door and the detergent
dispenser slightly ajar to prevent
mildew and odours.
5. Close the water tap.
12.12 Draining water out after
end of cycle
If you have chosen a programme or an
option that does not empty out the water
of the last rinse, the programme is
completed, but:
• The display shows the indicator , the
option indicator or and the
door locked indicator . The
indicator of the running phase
flashes.
• The drum still turns at regular
intervals to prevent the creases in the
laundry.
• The door stays locked.
www.aeg.com 38