AEG L6FBK741B User Manual Download

Page: 35 / 40

16. CONSUMPTION VALUES

16.1 Introduction

See the web link www.theenergylabel.eu for

detailed information about Energy Label.

The QR code on the energy label supplied with the

appliance provides a web link to the product

information sheet. Keep the energy label for

reference together with the user manual and all

other documents provided with this appliance.

16.2 Legend

Laundry load.

hh:mm Programme duration.

kWh

Energy consumption.

°C

Temperature in the laundry.

Litres

Water consumption.

rpm

Spin speed.

Remaining moisture at the end of spinning phase. The higher is the spin speed,

the higher is the noise and the lower is the remaining moisture.

Values and programme duration may differ depending on different

conditions (e.g. room temperature, water temperature and pressure, load

size and type of laundry, supply voltage) and also if you change the

default setting of a programme.

16.3 According to UK

Ecodesign for Energy-

Related Products and Energy

Information Regulations

Eco 40-60 pro‐

gramme

kWh

Litres

hh:mm

°C

rpm

Full load

0.705

47.0

3:20

53.00

1351

Half load

3,5

0.365

38.0

2:40

53.00

1351

Quarter load

0.165

33.0

2:35

54.00

1351

1) Maximum spin speed.

ENGLISH

Summary of Contents for L6FBK741B









































Search results

Summary of Contents for L6FBK741B

Reviews:

Related manuals for L6FBK741B

Brands by name

Popular brands

AEG L6FBK741B, User Manual

Search results

Summary of Contents for L6FBK741B

Reviews:

Related manuals for L6FBK741B

Brands by name

Popular brands