background image

Programmes

Load
(kg)

Energy
consump-
tion (kWh)

Water
consump-
tion (litre)

Approxi-
mate pro-
gramme
duration
(minutes)

Remain-
ing mois-
ture (%)

1)

Standard 40°C cotton 

3,5

0,49

34

224

52

1) 

At the end of spin phase.

Off Mode (W)

Left On Mode (W)

0.30

0.30

The information given in the chart above is compliant with the EU Commission regulation
1015/2010 implementing directive 2009/125/EC

15. 

TECHNICAL DATA

Dimension

Width/ Height/ Depth/
Total depth

600 mm/ 850 mm/ 571 mm/ 600 mm

Electrical connection

Voltage
Overall power
Fuse
Frequency

230-240 V
2200 W
13 A
50 Hz

Level of protection against ingress of solid particles
and moisture ensured by the protective cover, ex-
cept where the low voltage equipment has no pro-
tection against moisture

IPX4

Water supply pressure

1)

Minimum
Maximum

0,5 bar (0,05 MPa)
8 bar (0,8 MPa)

Water supply 

2)

Cold water

Maximum Load

Cotton

7 kg

Energy Efficiency Class

A+++ -20%

Spin Speed

Maximum

1400 rpm

1) 

The appliance works correctly if the water pressure is not lower than 0.05 MPa (0.5 bar). If you cannot

connect the water inlet hose to the cold water tap of the primary hydraulic system, connect it to your
domestic cold water storage system. Make sure not to exceed a distance of 5.02 m (16.5 ft) between the
appliance inlet hose and the bottom of the water storage tank.

2) 

Connect the water inlet hose to a water tap with a 3/4'' thread.

ENGLISH

33

Summary of Contents for L6FBG741R





































Reviews: