18.4
The inlet hose
20
O
20
O
20
O
45
O
45
O
45
O
• Connect the hose to the appliance.
Turn the inlet hose only left or right.
Loose the ring nut to set it in the cor-
rect position.
• Connect the water inlet hose to the
cold water tap with 3/4 thread.
CAUTION!
Make sure that there are no leaks
from the couplings.
Do not use an extension hose if
the inlet hose is too short. Con-
tact the service centre for the re-
placement of the inlet hose.
Water-stop device
A
The inlet hose has a water stop device.
This device prevents water leaks in the
hose because of its natural ageing. The
red sector in the window «A» shows this
fault .
If this occur, close the water tap and
contact the service centre to replace the
hose.
18.5
Water drainage
There are different procedures to con-
nect the drain hose:
30 www.aeg.com
Summary of Contents for L 87680 FL
Page 1: ...L 87680 FL EN User manual ...
Page 33: ...ENGLISH 33 ...
Page 34: ...34 www aeg com ...
Page 35: ...ENGLISH 35 ...
