8.7
Spin
With this option you can decrease the
default spin speed.
The display shows the indicator of the set
speed.
Additional spin options:
No Spin
• Set this option to remove all spin
phases.
• Set it for very delicate fabrics.
• The rinse phase uses more water for
some washing programmes.
• The display shows the indicator
.
Rinse Hold
• Set this option to prevent the laundry
creases.
• The washing programme stops with
the water in the drum. The drum turns
regularly to prevent the laundry
creases.
• The door stays locked. You must drain
the water to unlock the door.
• The display shows the indicator
.
To drain the water refer to
‘At the end of the
programme’.
8.8
Temperature
Set this option to change the default
temperature.
Indicator
= cold water.
The display shows the set temperature.
9.
BEFORE FIRST USE
1.
Put a small quantity of detergent in
the compartment for washing phase.
2.
Set and start a programme for cotton
at the highest temperature without
laundry.
This removes all possible dirt from the
drum and the tub.
10.
DAILY USE
10.1
Activating the appliance
1.
Open the water tap.
2.
Connect the mains plug to the mains
socket.
3.
Press button On/Off to activate the
appliance.
A short tune sounds.
10.2
Loading the laundry
1.
Open the appliance door
2.
Put the laundry in the drum, one item
at a time.
3.
Shake the items before you put them
in the appliance.
Make sure not to put too much laundry
in the drum.
4.
Close the door firmly.
CAUTION!
Make sure that no laundry
stays between the seal and
the door. There is a risk of
water leakage or damage to
the laundry.
www.aeg.com
14
Summary of Contents for L 79485 FL
Page 1: ...EN User Manual Washing Machine L 79485 FL ...
Page 21: ...5 1 2 6 7 8 1 2 9 1 2 ENGLISH 21 ...
Page 27: ...ENGLISH 27 ...
