10.13
Opening the door when
the delay start is active
While the delay start operates, the
appliance door is locked.
To open the appliance door:
1.
Press button Start/Pause.
In the display the door lock indicator
goes off.
2.
Open the appliance door.
3.
Close the door and press button
Start/Pause.
The delay start continues.
10.14
End of cycle
When the programme has finished, the
appliance stops automatically. The
acoustic signal operates (if it is active).
In the display comes on and the door
locked indicator
goes off.
The indicator of Start/Pause button goes
off.
1.
Press button On/Off to deactivate
the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
show the end of the last set
programme. Turn the
programme knob to set a
new cycle.
2.
Remove the laundry from the
appliance.
3.
Make sure that the drum is empty.
4.
Keep the door ajar, to prevent
mildew and odours
10.15
Draining water out after
end of cycle
The washing programme is completed,
but there is water in the drum
:
The drum turns regularly to prevent the
creases in the laundry.
The door lock indicator
is on. The
door stays locked.
You must drain the water to open the
door:
1.
If necessary, decrease the spin
speed.
2.
Press the Start/Pause button.
The appliance drains the water and
spins.
3.
When the programme is completed
and the door lock indicator
goes
off, you can open the door .
4.
Press On/Off some seconds to
deactivate the appliance.
The appliance drains and
spins automatically after
approximately18 hours.
10.16
AUTO Stand-by option
The AUTO Stand-by function
automatically deactivates the appliance
to decrease the energy consumption
when:
• You do not use the appliance for 5
minutes before you press Start/Pause
button.
Press the button On/Off to activate
the appliance again.
• After 5 minutes from the end of the
washing programme
Press the button On/Off to activate
the appliance again.
The display shows the end of the last
set programme.
Turn the programme knob to set a
new cycle.
If you set a programme or an
option that ends with water
in the drum, the AUTO
Stand-by function
doesn't
deactivate
the appliance to
remind you to drain the
water.
11.
HINTS AND TIPS
WARNING!
Refer to Safety chapters.
www.aeg.com
16
Summary of Contents for L 73483 FL
Page 1: ...EN User Manual Washing Machine L 73483 FL ...
Page 20: ...5 1 2 6 7 8 2 1 9 www aeg com 20 ...
Page 26: ...www aeg com 26 ...
Page 27: ...ENGLISH 27 ...
