By doing this, any water remaining in the
machine is removed, avoiding ice form-
ing and consequently damage to the ap-
pliance.
When you use the machine again, make
sure that the ambient temperature is
above 0°C.
12.
TROUBLESHOOTING
Certain problems are due to lack of sim-
ple maintenance or oversights, which
can be solved easily without calling out
an engineer. Before contacting your lo-
cal Service Centre, please carry out the
checks listed below.
During machine operation it is possible
that the
yellow
pilot light of button
8
blinks, one of the following alarm codes
appears on the display and at the same
time some acoustic signals sound every
20 seconds to indicate that the machine
is not working:
•
: problem with the water supply
•
: problem with the water drain-
ing
•
: door open
•
: anti-flooding system has activa-
ted
Once the problem has been eliminated,
press the button
8
to restart the pro-
gramme. If after all checks, the problem
persists, contact your local Service Cen-
tre.
Problem
Possible cause/Solution
The washing machine
does not start:
The door has not been closed.
• Close the door firmly.
The plug is not properly inserted in the power sock-
et.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installation.
The main fuse has blown.
• Replace the fuse.
The programme dial is not correctly positioned and
the button
8
has not been pressed.
• Please turn the programme dial and press the but-
ton
8
again.
The delay start has been set.
• If the laundry is to be washed immediately, cancel
the delay start.
The Child safety lock has been activated.
• Deactivate this device.
ENGLISH
23
