AEG L 60260 TL1 User Manual Download Page 4

• Adjust the feet to have the necessary

space between the appliance and the
carpet.

Electrical connection

WARNING!

Risk of fire and electrical shock.

• The appliance must be earthed.
• Make sure that the electrical informa-

tion on the rating plate agrees with
the power supply. If not, contact an
electrician.

• Always use a correctly installed shock-

proof socket.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug and to the mains cable.
Should the appliance power supply
cable need to be replaced, this must
be carried out by our Service Centre.

• Connect the mains plug to the mains

socket only at the end of the installa-
tion. Make sure that there is access to
the mains plug after the installation.

• Do not pull the mains cable to discon-

nect the appliance. Always pull the
mains plug.

• Do not touch the mains cable or the

mains plug with wet hands.

• This appliance complies with the

E.E.C. Directives.

Water connection

• Make sure not to cause damage to the

water hoses.

• The appliance is to be connected to

the water mains using the new sup-
plied hose-sets. Old hose sets must
not be reused.

• Before you connect the appliance to

new pipes or pipes not used for a long
time, let the water flow until it is clean.

• The first time you use the appliance,

make sure that there is no leakage.

2.2 

Use

WARNING!

Risk of injury, electrical shock,
fire, burns or damage to the ap-
pliance.

• Use this appliance in a household on-

ly.

• Do not change the specification of this

appliance.

• Obey the safety instructions on the

detergent packaging.

• Do not put flammable products or

items that are wet with flammable
products in, near or on the appliance.

• Make sure that you remove all metal

objects from the laundry.

• Do not put a container to collect pos-

sible water leakage under the appli-
ance. Contact the Service to ensure
which accessories can be used.

2.3 

Care and Cleaning

WARNING!

Risk of injury or damage to the
appliance.

• Before maintenance, deactivate the

appliance and disconnect the mains
plug from the mains socket.

• Do not use water spray and steam to

clean the appliance.

• Clean the appliance with a moist soft

cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal ob-
jects.

2.4 

Discard the appliance

1.

Disconnect the mains plug from the
mains socket.

2.

Cut off the mains cable and discard
it.

3.

Discard the door catch. This pre-
vents children or pets to be closed
in the appliance. There is a risk of
suffocation (only for front-loading
appliances).

4

www.aeg.com

Summary of Contents for L 60260 TL1

























Reviews: