18
Run wash cycle
Brief instructions
A washing cycle consists of the following steps:
0
Open the door, put in the washing.
0
Shut the door.
0
Add detergent/conditioner.
0
Set the correct washing program:
– Set the program on the program selector;
– Set the temperature on the temperature selector;
– Select type of washing with the type of washing buttons.
0
Press
(ON/OFF)
button.
Washing program starts automatically after six seconds. During these
six seconds:
0
Set any delay timer if required.
0
If applicable change final spin speed/select a
(Rinse hold).
You can change this setting and the temperature during the entire
washing cycle.
After the washing program has finished:
Attention!
If the washing cycle ends with a
(Rinse hold),
run
(PUMP OUT) or
(SPIN) before opening the door.
0
Open the door, remove the washing.
0
Press the
(ON/OFF)button!
