background image

g

21

1

Safety instructions

The safety standards of AEG electric 
appliances are in keeping with the rec-
ognised rules of technology and the 
law governing the safety of appliances. 
Nevertheless as a manufacturer we are 
committed to familiarise you with the 
following safety instructions:

General safety

• The appliance may only be connected 

to a power supply whose voltage and 
frequency comply with the specifica-
tions on the rating plate!

• Never pick up the appliance if

– the lead is damaged,
– the housing is damaged.

• Never use the lead to pull the plug out 

from the socket.

• In order to avoid danger, if the connec-

tion lead of this appliance is damaged, 
it must be replaced by the manufac-
turer, its customer service department 
or a similarly qualified person.

• Repairs to the appliance may only be 

carried out by trained personnel. As a 
result of incorrect repairs considerable 
dangers for the user may result. Please 
contact the AEG customer service 
department or your dealer in the event 
of repairs being necessary.

• The appliance is only intended for 

processing foods in the home. The 
manufacturer accepts no liability for 
damage caused by improper use or use 
other than for the intended purpose.

Safety of children

• Never leave the appliance unattended 

when on and supervise particularly 
carefully if young children are 
around!

To be noted when using the food 
processor

• Never put the appliance into use when 

the hands are wet.

• No paints (lacquer, polyester, etc.) must 

be stirred with the appliance – 

Explo-

sion danger!

• Switch the appliance off and withdraw 

the mains plug each time before clean-
ing and maintenance.

• Never dip the motor casing (fig. 1/A) in 

water or other liquids.

• The manufacturer accepts no liability 

for possible damage caused by 
improper or incorrect use.

• The tools must only be inserted or 

removed from the appliance when it is 
disconnected from the mains supply.

Caution: The metal blade (fig. 1/Q) is 
extremely sharp! Danger of injury!

 

The metal blade should only be held by 
the handle and only stored with the 
blade protector fitted! Caution when 
rinsing!

Caution: The cutting inserts (fig. 9) 
are very sharp! Danger of injury!

 Keep 

the inserts only in the accessories com-
partment provided (fig. 1/K). Caution 
when rinsing!

Caution: The blade unit of the mixer 
(fig. 14/a) is very sharp. Danger of 
injury!

 Care should be taken when dis-

assembling and assembling the mixer.

• Caution: Never reach with the fingers 

in the filling inlet (fig. 1/F)! Danger of 
injury!

Caution:

 No hard objects (e.g. spoons) 

must be placed in the mixer while run-
ning and do not reach into the mix 
container with the hands. 

Danger of 

injury!

• The cover should only be removed 

when the tools are stationary.

• Do not hold long objects (blade, 

wooden spoon, dough scraper or the 
like) in the filling inlet. 

Danger of 

injury!

 Work only with the stopper (fig. 

1/E) to compress the cut food.

• Do not fill hot liquids (only cold or 

warm) in the mix container or all-pur-
pose bowl.

• Always place the all-purpose bowl (fig. 

1/G) on the motor casing before insert-
ing the spindle (fig. 1/H) and the tools.

KM850_de_nl.book  Seite 21  Donnerstag, 29. Juli 2004  7:08 19

Summary of Contents for KM 8.. Assistent























Reviews: