background image

12

13

www.aeg.com

7.1 Coffee beans

 

 

IMPORTANT!

  Do not use green, caramelised 

or candied coffee beans as they 

could stick to the coffee mill and 

make it unusable.

1.

  Fill the beans container (fig. 9 Quick 

Guide) with coffee beans;

2.

  Place a cup (or two cups) under the 

coffee spouts (A7);

3.

  Lower the spouts as near as possible 

to the cup. This makes a creamier 

coffee;

4.

  Select the required coffee by turning 

the rotary.

 

Choose the desired coffee:

•  Ristretto

•  Espresso

•  Espresso lungo

•  Long Coffee

•  Americano

Espresso

Specials

 
+Milk

5.

  Customize Aroma, coffee quantity 

and number of cups.

6.

  Press START icon.

7.

  Preparation begins. An image of the 

selected beverage appears on the 

display (C1), together with a progress 

bar which gradually fills as prepara-

tion proceeds.

 

 

While the machine is making cof-

fee, delivery can be interrupted at 

any moment by pressing STOP.

Once the coffee has been made, the 

appliance is ready to make the next 

beverage.

 

 

Various alarm messages could 

be displayed while using the ap-

pliance (fill tank, empty ground 

container, etc.). Their meaning is 

explained in section “Displayed 

messages”.

•  For hotter coffee, see section “Tips for 

a hotter coffee”.

•  If the coffee is delivered a drop at a 

time, too weak and not creamy enough 

or too cold, read the tips in sections 

“Adjusting the coffee mill” and “Trou-

bleshooting”.

•  Preparation of each coffee can be 

customised.

•  If “Energy Saving” mode is active, you 

may have to wait a few seconds before 

the first coffee is delivered.

7.2 Pre-ground coffee

 

 

IMPORTANT!

  Never add pre-ground coffee 

when the machine is off or it could 

spread through the inside of the 

machine and dirty it. This could 

damage the appliance.

7.

 

MAKING COFFEE

6.3

 

Energy saving

 

Use this function to enable or disable en-

ergy saving. When enabled, the function 

reduces energy consumption in compli-

ance with European regulations.

6.4

 

Water temperature 

 

Use this function to modify the tem-

perature of the water used to make the 

coffee.

Summary of Contents for KKE994500





























Reviews: