background image

g

12

KF 2062 Timer (Figure 2c)

0

Press the on/off button (Figure 2c/G). 
The indicator (red) (Figure 2c/F) is illu-
minated and the brewing procedure 
will start.

Preparing small quantities of coffee 
(2-4 cups)

Your coffee machine has an aroma 
button (Figure 2c/J). The aroma setting 
guarantees full coffee enjoyment even 
with small quantities (2-4 cups).

0

Press the aroma button (Figure 2c/J). 
The symbol

 will appear in the dis-

play (Figure 2c/A). To cancel the 
selected quantity 2-4 cups, press the 
aroma button again. The symbol

 

will go out in the display. Start and end 
the brewing procedure as described 
above.

Preparing coffee using the timer

Your appliance has a timer with which 
you can programme the start of the 
brewing procedure up to 24 hours in 
advance. 
First set the current time. The display 
(Figure 2c/A) will flash “00:00”.

0

Press the button for HOURS 
(Figure 2c/B) for approx. 2 seconds 
and hold it down until the correct time 
is shown in the display (Figure 2c/A).

0

Press the button for MINUTES 
(Figure 2c/C) and proceed as for 
setting the hours.
Set the time at which you wish the 
brewing procedure to start. 

0

Press the programme button 
(Figure 2c/H).

0

Press the button for HOURS 
(Figure 2c/B) and set the hours.

0

Press the button for MINUTES 
(Figure 2c/C) and set the minutes.

0

Press the AUTO-START button 
(Figure 2c/D).
The display for AUTO-START 
(Figure 2c/E) is illuminated. The pro-
grammed start time will go out in the 
display and the current time will reap-

pear. The brewing procedure will start 
automatically at the starting time you 
have programmed. The indicator (red) 
(Figure 2c/F) is illuminated.
To check the programmed start time, 
press the programme button 
(Figure 2c/H). The start time will 
appear in the display (Figure 2c/A). 
After a few seconds it will go out 
and the current time will reappear.
If you wish to cancel the selected start 
time, press the button for AUTO-START 
(Figure 2c/D). The green display for 
AUTO-START (Figure 2c/E) will go out.

Important:

 

If there is a brief power 

failure of up to 5 seconds the data 
remains stored. In the event of a longer 
power failure the entered data is 
erased and the time and start time 
must be reprogrammed as described 
above

.

Important:

 Once a start time has been 

programmed, your coffee machine will 
automatically start a brewing proce-
dure every 24 hours as long as the 
display (green) for AUTO-START 
(Figure 2c/E) is illuminated. 

You can also use the “2-4 cups” 
aroma function when a start time is 
programmed!

0

Once the brewing procedure has been 
completed and you no longer require 
the warming plate function, switch the 
appliance off by pressing the on/off 
button again. The indicator will go out.

Auto shut off

Your coffee machine has a safety cut-
out. If the appliance is not used for 
2 hours after the brewing procedure 
has started it switches off automati-
cally for safety reasons and also to save 
energy. The indicator (red) (Figure c/F) 
will go out.

Summary of Contents for KF 2060











Reviews: