Operating Instructions
10
Adjust the Water Softener
To avoid the scale deposits on the dishes and in the dishwasher, the
dishes must be washed with soft, i.e. low lime content, water. The dish-
washer therefore has a built-in water softener, in which tap water from
a
hardness
of
4 °d
(German
degree)
is
softened
with
the
aid
of
special salt.
3
You water supplier will be able to inform you on the hardness and
hardness range of the water in your area.
0
Adjust the water softener to the setting that corresponds to the hard-
ness of the water in your area. The water softener can be adjusted in
10 steps.
0
1.
The dishwasher must be switched off.
2.
Press the function and water softener buttons simultaneously and keep
them pressed
3.
In addition press the ON/OFF switch
M
.
The LED indicators for the function and water softener buttons flash.
4.
Press the softener button again.
The water softener button indicator starts to flash.
– The number of flashes corresponds to the hardness setting. (Excep-
tion: hardness setting 0 is indicated by 10 flashes).
– The sequence of flashes is repeated after a 5 second pause.
Water Hardness
in
°d
1
)
in ppm
2
)
Range
1)(°d) German degree, measure of the hardness of water
2)(ppm) Parts Per Million
*factory setting
Adjust
to Hardness Setting
Number of
Flashes
41-50
35-40
31-34
27-30
23-26
730-900
630-720
550-620
480-540
410-470
IV
9
8
7
6
5
9
8
7
6
5
19-22
15-18
330-400
260-320
III
4
3*
4
3
11-14
190-250
II
2
2
4-10
70-180
I/II
1
1
under 4
under 70
I
0
no salt necessary
10