AEG KDE911424B, User Manual

Page: 5 / 14

ENGLISH 5
•
The electric system must be equipped with an isolation
switch providing all-pole contact separation which
provides for full disconnection under overvoltage
category III.
•
A plug must be used for the electrical connection; this
must remain accessible after installation.
•
Warning! Before connecting the appliance, compare
the power supply data (voltage and frequency)
indicated on the data plate with those of the mains
supply. If these data do not match there may be
problems. In case of doubt, contact an electrician.
•
Warning! If the appliance is to be connected without
using a plug (hard-wired), the appliance must be
installed and connected by a technician. Contact a
qualified electrician who will perform the work in
accordance with electrical code and comply with all
provisions of this manual. The manufacturer cannot be
held responsible for damage resulting from installation
or connection errors.
•
Warning! The electrical safety of the appliance can
only be guaranteed if it is properly earthed. The
manufacturer cannot be held responsible for damage
resulting from the absence of or defects in the
installation’s protective earthing system (e.g. electrical
shock).
•
Warning! Only use the appliance once it has been
fully installed. Only full and final installation within the
kitchen unit carcase can ensure that there is no risk of
contact with live parts.