Technical data/changing the battery/cleaning
Disposal/notes on repair/Notes on troubleshooting
20
21
N O T E !
• Replace batteries only with batteries of the identical type
(CR 2032).
• Dispose of used batteries properly (collection point).
Operating voltage
3 V DC
Battery type
1 x CR 2032
IP Code
IP 20
Permitted ambient temperature
0 to +55 °C
Radio frequency
868.3 MHz
Notification number
CE 0682
Dimensions in mm (manual transmitter)
L 74 x W 44 x H 15
Dimensions in mm (wall bracket)
L 85 x W 85 x H 18
Technical data
Battery replacement
1. Undo the screw on the back of the IR Radio
S/IR Radio W.
2. Open the housing.
3. Remove the battery.
4. Place the new batteries (CR 2032) into the
transmitter in the
correct position
.
5. Close the housing.
6. Tighten the screw on the back of the device.
Disposal
Please observe the current national regulations.
Dispose of according to the condition and existing regulations.
e.g. as:
• Electronic waste (PCB)
• Plastic (Housing parts)
• Batteries
Cleaning
Clean the device with a damp cloth only.
Do not use cleaning agents, these can attack the plastic.
Notes on repair
Please contact us if you are unable to eliminate a problem.
When contacting our service team, please always state the item description and
number from the type plate (back of device).
– Item number
– Accompanying conditions
– Item description
– Own presumption
– Type of fault
– Previously occurring unusual events
Notes on troubleshooting
Fault
Cause
Remedy
No radio reception
Transmitter is not
Program the transmitter.
programmed.
Heater does
1. Radiant heater
1. Check connection.
not heat.
wrongly connected.
2. Heating element
2. Replace heating
is defective.
element.
Summary of Contents for IR Radio S
Page 32: ...62 63 ...
