Problem
Possible cause
Remedy
FlexiBridge (Flexible Bridge) oper‐
ates. One or more sections of the
function mode which operates are
not covered by the cookware.
Place the cookware on the correct
number of sections of the function
mode which operates or change the
function mode. Refer to "Flexible in‐
duction cooking area".
PowerSlide operates. Two pots are
placed on the flexible induction
cooking area or the cookware covers
more than one cooking area activa‐
ted by the function.
Use only one pot. Refer to "Flexible in‐
duction cooking area".
and a number come on.
There is an error in the hob.
Deactivate the hob and activate it
again after 30 seconds. If
comes
on again, disconnect the hob from the
electrical supply. After 30 seconds,
connect the hob again. If the problem
continues, speak to an Authorised
Service Centre.
9.2 If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre. Give the data
from the rating plate. Give also three digit
letter code for the glass ceramic (it is in the
corner of the glass surface) and an error
message that comes on. Make sure, you
operated the hob correctly. If not the
servicing by a service technician or dealer
will not be free of charge, also during the
warranty period. The information about
guarantee period and Authorised Service
Centres are in the guarantee booklet.
10. TECHNICAL DATA
10.1 Rating plate
Model IKE74471XB
PNC 949 597 258 00
Typ 62 C4A 05 AA
220 - 240 V / 400 V 2N 50 - 60 Hz
Induction 7.35 kW
Made in Germany
Ser.Nr. .................
7.35 kW
AEG
10.2 Cooking zones specification
Cooking zone
Nominal power
(maximum heat
setting) [W]
PowerBoost [W] PowerBoost
maximum dura‐
tion [min]
Cookware diame‐
ter [mm]
Middle front
1400
2500
4
125 - 145
Right rear
2300
3600
10
180 - 240
Flexible induction
cooking area
2300
3200
10
minimum 100
ENGLISH
21
