AEG IKE64443FB, User Manual

Page: 14 / 112

2. Press and hold for 3 seconds. The
display comes on and goes off.
3. Press and hold for 3 seconds. or
appears.
4. Press . P72 appears.
5. Press / of the timer to set the
power level.
Power levels
Refer to “Technical data” chapter.
CAUTION!
Make sure that the selected
power fits the house installation
fuses.
• P72 — 7200 W
• P15 — 1500 W
• P20 — 2000 W
• P25 — 2500 W
• P30 — 3000 W
• P35 — 3500 W
• P40 — 4000 W
• P45 — 4500 W
• P50 — 5000 W
• P60 — 6000 W
5.14 Power management
• Cooking zones are grouped according to
the location and number of the phases in
the hob. See the illustration.
• Each phase has a maximum electricity
loading of 3600 W.
• The function divides the power between
cooking zones connected to the same
phase.
• The function activates when the total
electricity loading of the cooking zones
connected to a single phase exceeds
3600 W.
• The function decreases the power to the
other cooking zones connected to the
same phase.
• The heat setting display of the reduced
zones alternates between the chosen
heat setting and the reduced heat setting.
After some time the heat setting display of
the reduced zones stays on the reduced
heat setting.
Power management with Power limitation
When you set the Power limitation function to
6.0 kW or less, power of the hob is divided
between all cooking zones.
When you set the Power limitation function to
more than 6.0 kW, the power of the hob is
divided between its left and right side.
5.15 Hob²Hood
It is an advanced automatic function which
connects the hob to a special hood. Both the
hob and the hood have an infrared signal
communicator. Speed of the fan is defined
automatically on basis of mode setting and
temperature of the hottest cookware on the
hob. You can also operate the fan from the
hob manually.
For most of the hoods the
remote system is originally
deactivated. Activate it before
you use the function. For more
information refer to hood user
manual.
14 ENGLISH