background image

 

Automat‐

ic light

Boiling1) Frying2)

Mode H6

On

Fan speed

2

Fan speed

3

1) The hob detects the boiling process and acti‐

vates fan speed in accordance with automatic

mode.

2) The hob detects the frying process and acti‐

vates fan speed in accordance with automatic

mode.

3) This mode activates the fan and the light and

does not rely on the temperature.
Changing the automatic mode

1. Deactivate the appliance.
2. Touch   for 3 seconds. The display

comes on and goes off.

3. Touch   for 3 seconds.
4. Touch   a few times until   comes on.
5. Touch   of the Timer to select an

automatic mode.

To operate the hood directly on

the hood panel deactivate the

automatic mode of the function.

When you finish cooking and

deactivate the hob, the hood fan

may still operate for a certain

period of time. After that time the

system deactivates the fan

automatically and prevents you

from accidental activation of the

fan for the next 30 seconds.

Operating the fan speed manually

You can also operate the function manually.
To do that touch   when the hob is active.

This deactivates automatic operation of the

function and allows you to change the fan
speed manually. When you press   you

raise the fan speed by one. When you reach
an intensive level and press   again you will

set fan speed to 0 which deactivates the

hood fan. To start the fan again with fan
speed 1 touch  .

To activate automatic operation

of the function, deactivate the

hob and activate it again.

Activating the light

You can set the hob to activate the light

automatically whenever you activate the hob.

To do so set the automatic mode to H1 – H6.

The light on the hood

deactivates 2 minutes after

deactivating the hob.

6. HINTS AND TIPS

WARNING!

Refer to Safety chapters.

6.1 Cookware

For induction cooking zones a

strong electro-magnetic field

creates the heat in the cookware

very quickly.

Use the induction cooking zones with

suitable cookware.
• The bottom of the cookware must be as

thick and flat as possible.

• Ensure pan bases are clean and dry

before placing on the hob surface.

• In order to avoid scratches, do not slide or

rub the pot across the ceramic glass.

Cookware material

ENGLISH

13

Summary of Contents for IKB63302FB





















Reviews: