background image

Problem

Possible cause

Remedy

 

You use a very tall pot which blocks

the signal.

Use a smaller pot, change the cooking

zone or operate the hood manually.

Automatic Heat Up does not op‐

erate.

The zone is hot.

Let the zone become sufficiently cool.

 

The highest heat setting is set.

The highest heat setting has the same

power as the function.

The heat setting changes be‐

tween two levels.

Power management operates.

Refer to "Daily use".

The control panel becomes hot to

the touch.

The cookware is too large or you put

it too close to the control panel.

Put large cookware on the rear zones,

if possible.

There is no sound when you

touch the panel sensor fields.

The sounds are deactivated.

Activate the sounds. Refer to "Daily

use".

 comes on.

Child Safety Device or Lock oper‐

ates.

Refer to "Daily use".

 comes on.

There is no cookware on the zone.

Put cookware on the zone.

 

The cookware is unsuitable.

Use cookware suitable for induction

hobs. Refer to "Hints and tips".

 

The diameter of the bottom of the

cookware is too small for the zone.

Use cookware with correct dimen‐

sions. Refer to "Technical data".

The outer ring is not activated.

The diameter of the bottom of the

cookware is too small.

Use cookware with a bigger bottom di‐

ameter.

 and a number come on.

There is an error in the hob.

Deactivate the hob and activate it
again after 30 seconds. If 

 comes

on again, disconnect the hob from the

electrical supply. After 30 seconds,

connect the hob again. If the problem

continues, speak to an Authorised

Service Centre.

8.2 If you cannot find a solution...

If you cannot find a solution to the problem

yourself, contact your dealer or an

Authorised Service Centre. Give the data

from the rating plate. Give also three digit

letter code for the glass ceramic (it is in the

corner of the glass surface) and an error

message that comes on. Make sure, you

operated the hob correctly. If not the

servicing by a service technician or dealer

will not be free of charge, also during the

warranty period. The information about

guarantee period and Authorised Service

Centres are in the guarantee booklet.

9. TECHNICAL DATA

9.1 Rating plate

Model IKB63302FB

PNC 949 597 414 00

Typ 61 B3A 02 AA

220 - 240 V 50 - 60 Hz

ENGLISH

17

Summary of Contents for IKB63302FB





















Reviews: