AEG IAE64843FB, User Manual

Page: 11 / 72

6.6 Power Management
• Cooking zones are grouped
according to the location and number
of the phases in the hob. See the
illustration.
• Each phase has a maximum electricity
loading of 3600 W.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking
zones connected to a single phase
exceeds 3600 W.
• The function decreases the power of
the other cooking zones connected to
the same phase, which has an
influence on the available heat
setting.
• The maximum heat setting is visible
on the slider. Only the digits in white
are active.
• If a higher heat setting is not available
reduce it for the other cooking zones
first.
Power Management with Power
limitation function
When you set the Power limitation
function to
6.0 kW or less
, power of the
hob is divided between all cooking
zones.
When you set the Power limitation
function to more than 6.0 kW , power of
the hob is divided between two cooking
zones in a pair.
6.7 Power limitation
Originally the appliance works at the
highest possible power level (7200 W).
You can change the maximum power if
the installation does not support the full
power.
Make sure that the selected
power fits to the house
installation fuses.
1.
Touch on the display to open the
Menu.
2. Select Settings > Setup > Power
Management and choose the
appropriate power level between
1500 W and 7200 W.
To leave the Menu touch the right side
of the display, outside of the pop-up
window, or touch repeatedly.
6.8 Bridge function
This function connects two cooking
zones and they operate as one with the
same heat setting.
You can use the function with large
cookware.
1. Place the cookware on two cooking
zones. The cookware must cover the
centres of both zones.
2. Touch to activate the function.
The zone symbol changes.
3. Set the heat setting.
The cookware must cover the centres of
both zones but not go beyond the area
marking.
ENGLISH 11