100-160mm
Place the cookware with the bottom
diameter larger then 160 mm centrally
between two sections.
> 160 mm
5.2
FlexiBridge Standard
mode
This mode is active when you activate
the hob. It connects the sections into two
separate cooking zones. You can set the
heat setting for each zone separately.
Use two left side control bars.
Correct cookware position:
Incorrect cookware position:
5.3
FlexiBridge Big Bridge
mode
To activate the mode press
until you
see the correct mode indicator. This
mode connects three rear sections into
one cooking zone. The one front section
is not connected and operates as a
separate cooking zone. You can set the
heat setting for each zone separately.
Use two left side control bars.
Correct cookware position:
To use this mode you have to place the
cookware on the three connected
sections. If you use cookware smaller
than two sections the display shows
and after 2 minutes the zone switches off.
www.aeg.com
12
Summary of Contents for HK956600XB
Page 70: ...www aeg com 70 ...
Page 71: ...DEUTSCH 71 ...