4.
DAILY USE
4.1
Activation and
deactivation
Touch
for 1 second to activate or de-
activate the appliance.
The control panel comes on after you ac-
tivate the appliance and goes off after
you deactivate the appliance.
When the appliance is deactivated you
can see only
sensor field.
4.2
Automatic Switch Off
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated (
).
• You do not set the heat setting after
you activate the appliance.
• You spill something or put something
on the control panel for more than 10
seconds, (a pan, a cloth, etc.). An
acoustic signal sounds some time and
the appliance deactivates. Remove the
object or clean the control panel.
• The appliance becomes too hot (e.g.
when, a saucepan boils dry). Before
you use the appliance again, wait for
the cooking zone to cool down.
• You use incorrect cookware. The sym-
bol
comes on and the cooking
zone deactivates automatically after 2
minutes.
• You do not deactivate a cooking zone
or change the heat setting. After some
time
comes on and the appliance
deactivates. See below.
• The relation between heat setting and
times of the Automatic Switch Off
function:
•
,
-
— 6 hours
•
-
— 5 hours
•
-
— 4 hours
•
-
— 1.5 hours
4.3
The heat setting
Touch the control bar at the heat set-
ting. Change clockwise or counterclock-
wise, if it is necessary. Do not release be-
fore you have a correct heat setting. The
display shows the heat setting.
4.4
Grill Function
Use the Grill Function with the
Maxisense Plancha Grill accesso-
ry
1)
.
The Grill Function connects two right
side cooking zones under the accessory
and they operate as one.
First set the heat setting for one of the
cooking zones.
To activate the Grill Function, touch
.
To set or change the heat setting, touch
one of the control sensors.
To deactivate the Grill Function, touch
. The cooking zones operate inde-
pendently.
4.5
Automatic Heat Up
You can get a necessary heat setting in a
shorter time if you activate the Automat-
ic Heat Up function. This function sets
the highest heat setting for some time
(see the diagram), and then decreases to
the necessary heat setting.
To start the Automatic Heat Up function
for a cooking zone:
1.
Touch
(
comes on in the dis-
play).
1)
The Maxisense Plancha Grill accessory is not supplied with the appliance. For more in-
formation, please contact your local supplier.
8
www.aeg.com
