Heat setting
The hob deacti-
vates after
, 1 - 3
6 hours
4 - 7
5 hours
8 - 9
4 hours
10 - 14
1.5 hour
4.3
The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat
setting or move your finger along the
control bar until you reach the correct
heat setting.
4.4
Automatic Heat Up
If you activate this function you can get a
necessary heat setting in a shorter time.
The function sets the highest heat setting
for some time and then decreases to the
correct heat setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone:
touch ( comes on).
Immediately touch the correct heat
setting. After 3 seconds comes on.
To deactivate the function:
change the
heat setting.
4.5
Power function
This function makes more power
available to the induction cooking zones.
The function can be activated for the
induction cooking zone only for a limited
period of time. After this time the
induction cooking zone automatically
sets back to the highest heat setting.
Refer to “Technical
information” chapter.
To activate the function for a cooking
zone:
touch . comes on.
To deactivate the function:
change the
heat setting.
4.6
Timer
Count Down Timer
You can use this function to set how long
the cooking zone should operate for a
single cooking session.
First set the cooking zone then set the
function.
You can set the heat setting
before or after you set the function.
To set the cooking zone:
touch
again and again until the indicator of a
necessary cooking zone comes on.
To activate the function:
touch of
the timer to set the time (
00 - 99
minutes). When the indicator of the
cooking zone starts to flash slowly the
time counts down.
To see the remaining time:
set the
cooking zone with . The indicator of
the cooking zone starts to flash quickly.
The display shows the remaining time.
To change the time:
set the cooking
zone with . Touch or .
To deactivate the function:
set the
cooking zone with and touch . The
remaining time counts back to
00
. The
indicator of the cooking zone goes out.
When the time comes to an
end, the sound operates and
00
flashes. The cooking
zone deactivates.
To stop the sound:
touch .
CountUp Timer (The count up timer)
You can use this function to monitor how
long the cooking zone operates.
To set the cooking zone:
touch
again and again until the indicator of a
necessary cooking zone comes on.
ENGLISH
9
Downloaded from www.vandenborre.be
