AEG HE614500, User Manual, Page: 23 / 52

WARNING!
Sharp objects and abrasive cleaning agents will damage the appliance.
For your safety, do not clean the appliance with steam blasters or high-pressure cleaners.
The stainless steel can become tarnished if it is too much heated. Refer to this you must not
cook with potstones, earthenware pans or cast iron plates. Do not use aluminium foil to
prevent damage the top during operation.
Stainless steel parts wash with water, and then dry with a soft cloth.
Scratches or dark stains have no effect on how the appliance operates.
Removing the dirt:
1. Use the fine scouring powder or a scouring pad to remove the dirt.
2. Clean the appliance with a damp cloth and some detergent.
3. Heat the hotplate to a low temperature and leave to dry.
4. To maintain the hotplates, wipe the plates with a drop of olive oil on a kitchen towel to
prevent rust.
For stainless steel edges of the hob use cleaner for stainless steel.
The stainless steel edge of the plate can be slightly discoloured as a result of the thermal
load.
WHAT TO DO IF…
Problem Possible cause and remedy
The appli -
ance does
not operate.
• Examine the fuse in the electrical system of the house in the fuse box. If the fuses
blow time after time, speak to an authorised electrician.
The plate
does not
heat up.
• Make sure that you plug in the appliance and switch the electrical supply.
• Make sure that you turn correct control knob.
• Examine the fuse in the electrical system of the house in the fuse box. If the fuses
blow time after time, speak to an authorised electrician.
Results of
plate are
not satis -
factory.
• Make sure that plate is clean and dry.
• Make sure that the cooking pan is the correct size for the plate.
• Make sure that cooking pan has a flat bottom.
• Make sure that the setting is correct for type of cooking.
If there is a fault, first try to find a solution to the problem yourself. If you cannot find a
solution to the problem yourself, speak your dealer or the local Service Force Centre.
If you operated the appliance incorrectly, or the installation was not carried out by a regis
-
tered engineer, the visit from the customer service technician or dealer may not take place
free of charge, even during the warranty period.
What to do if… 23