AEG HAS 5660, Instruction Manual

Page: 30 / 56

English
30
• Children must not play with the appliance.
• Cleaning and user maintenance must not be carried out by
children , unless they are supervised.
• This appliance is not intended to be immersed in water during
cleaning. Please observe the instructions that we have included
for you in the chapter “Cleaning and care”.
Delivery contents
1 Main body
1 Small round brush
1 Special round brush with retractable bristles
Brush attachments
• The round brushes feature different diameters. Select a
brush according to the desired size of curls.
• The brush with the largest diameter is a special brush
with retractable bristles. Turn the upper end of the brush
to retract the bristles. That allows for the brush to be
removed more easily from your hair.
Assembly / disassembly of attachments
WARNING: Risk of burns!
If you want to change an attachment directly after use, let
the appliance cool down first!
CAUTION:
The locking mechanism can break if you install or remove
the attachments in any other way than as described.
Refer to the markings on the main unit and the attachments.
1. Press and hold the button next to the “PUSH” marking
while installing an attachment to the main unit. Align the
arrow marking with the tip of the marking on the
main unit.
2. Slightly turn the attachment clockwise. When both the
and the symbol are aligned on top of each other, the
attachment is locked. Release the button.
3. In order to unlock the attachment, press and hold the
“PUSH” button and at the same time turn the attach-
ment anti-clockwise. Remove the attachment and then
release the button.
Commissioning
• Remove all packaging material.
• Unwind the mains cable completely.
• Fit one attachment.
Electrical Connection
• Before inserting the plug into the socket, make sure that
the mains voltage to be used matches that of the device.
You can find this information on the nameplate.
• Connect the appliance to a properly installed earthed
socket.
Use
Switch positions
The device has a switch with 4 settings. The markings are
located next to the slide switch. You can select the following
functions:
0 = off
1 = moderate air flow, medium temperature
2 = strong air flow, high temperature
COOL = strong air flow, low temperature
When turning on the device, the control lamp lights up.
Using the round brushes
• Comb your hair and separate it into single strands.
• Twist one hair strand around the brush starting from the
tips all the way to the hairline. Keep holding the device in
that position for several seconds until the desired degree
of drying and styling has been achieved.
• Then unwind the hair strand again.
• Blow-dry your hair strand by strand.
After use
• Let your hair cool down completely before continuing to
style it.
• Do not comb your hair afterwards if you want to keep the
curls strong. Just use your fingers for styling.
Switch-off
After use, slide the switch to position “ 0 ” and disconnect
from the mains.
Storage
• Leave the device to cool before putting it away!
• To do so, place the appliance onto one side of the hous
-
ing or hang it up by the suspension eye.