8.1
The salt container
CAUTION!
Use rough salt designed for
dishwashers only. Fine salt
increases the risk of
corrosion.
The salt is used to recharge the resin in
the water softener and to assure good
washing results in daily use.
How to fill the salt container
1.
Turn the cap of the salt container
counterclockwise and remove it.
2.
Put 1 litre of water in the salt
container (Only for the first time).
3.
Fill the salt container with dishwasher
salt.
4.
Remove the salt around the opening
of the salt container.
5.
Turn the cap of the salt container
clockwise to close the salt container.
CAUTION!
Water and salt can come out
of the salt container when
you fill it. After you fill the
salt container, immediately
start a programme to
prevent corrosion.
8.2
How to fill the rinse aid
dispenser
A
B
D
C
M
AX
1
2
3
4
+
-
A
B
D
C
CAUTION!
Only use rinse aid
specifically designed for
dishwashers.
1.
Press the release button (
D
) to open
the lid (
C
).
2.
Pour the rinse aid in the dispenser (
A
)
until the liquid reaches the fill level
'max'.
3.
Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4.
Close the lid. Make sure that the
release button locks into position.
You can turn the selector of
the released quantity (
B
)
between position 1 (lowest
quantity) and position 4 or 6
(highest quantity).
9.
DAILY USE
1.
Open the water tap.
www.aeg.com
12
Summary of Contents for FSS52610Z
Page 1: ...USER MANUAL EN User Manual Dishwasher FSS52610Z ...
Page 22: ...www aeg com 22 ...
Page 23: ...ENGLISH 23 ...
