background image

Problem and alarm code

Possible cause and solution

The program does not start. • Make sure that the appliance door is closed.

• If the delay start is set, cancel the setting or wait for the

end of the countdown.

• The appliance has started the procedure to recharge

the resin inside the water softener. The duration of the
procedure is approximately 5 minutes.

The appliance does not fill
with water.
The display shows 

.

• Make sure that the water tap is open.
• Make sure that the pressure of the water supply is not

too low. For this information, contact your local water
authority.

• Make sure that the water tap is not clogged.
• Make sure that the filter in the inlet hose is not clogged.
• Make sure that the inlet hose has no kinks or bends.

The appliance does not
drain the water.
The display shows 

.

• Make sure that the sink spigot is not clogged.
• Make sure that the filter in the outlet hose is not clog-

ged.

• Make sure that the interior filter system is not clogged.
• Make sure that the drain hose has no kinks or bends.

The anti-flood device is on.
The display shows 

.

• Close the water tap and contact an Authorised Service

Centre.

The appliance stops and
starts more times during op-
eration.

• It is normal. It provides optimal cleaning results and en-

ergy savings.

The program lasts too long.

• Select the TimeSaver option to shorten the program

time.

• If the delayed start option is set, cancel the delay setting

or wait for the end of the countdown.

The remaining time in the
display increases and skips
nearly to the end of program
time.

• This is not a defect. The appliance is working correctly.

Small leak from the appli-
ance door.

• The appliance is not levelled. Loosen or tighten the ad-

justable feet (if applicable).

• The appliance door is not centred on the tub. Adjust the

rear foot (if applicable).

The appliance door is diffi-
cult to close.

• The appliance is not levelled. Loosen or tighten the ad-

justable feet (if applicable).

• Parts of the tableware are protruding from the baskets.

Rattling/knocking sounds
from inside the appliance.

• The tableware is not properly arranged in the baskets.

Refer to basket loading leaflet.

• Make sure that the spray arms can rotate freely.

www.aeg.com

18

Summary of Contents for FSS52610Z

























Reviews: