AEG FSK93707P User Manual Download Page 7

3.1 Internal light

The appliance has an internal lamp. It

comes on when you open the door or

switch the appliance on while the door is

open.

The lamp goes off when you close the

door or switch the appliance off.

Otherwise, it goes off automatically after

some time to save energy.

4. CONTROL PANEL

1

2

3

4

5

6

1

On/Off button / Reset button

2

Delay Start button

3

Display

4

MY TIME selection bar

5

EXTRAS buttons

6

AUTO Sense program button

4.1 Display

The display shows the following

information:
• ECOMETER

• Indicators

• Programme names and durations

• Delay start time

• Information texts

4.2 ECOMETER

The ECOMETER indicates how the

programme selection impacts energy

and water consumption. The more bars

are on, the lower the consumption is.

 indicates the most environmentally

friendly programme selection for a

normally soiled load.

4.3 Indicators

Indicator

Description

Rinse aid indicator. It is on when the rinse aid dispenser needs refilling.

Refer to "Before first use".

Salt indicator. It is on when the salt container needs refilling. Refer to "Be‐

fore first use".

Machine Care indicator. It is on when the appliance needs internal clean‐

ing with the Machine Care programme. Refer to "Care and cleaning".

ENGLISH

7

Summary of Contents for FSK93707P





























































Reviews: