AEG FSE69200RO, User Manual, Page: 12 / 32

A B C
A. Previous button
B. OK button
C. Next button
Use Previous and Next to switch
between the basic settings and to
change their value.
Use OK to enter the selected setting and
to confirm changing its value.
How to enter setting mode
You can enter setting mode before
starting a programme. You cannot enter
setting mode while the programme is
running.
To enter setting mode, press and hold
simultaneously
and for
about 3 seconds.
The lights related to the Previous, OK
and Next are on.
How to change a setting
Make sure the appliance is in setting
mode.
1. Use Previous or Next to select the
desired setting.
The display shows the current setting
value (a digit and the dedicated letter).
2. Press OK to enter the setting.
The current setting value flashes.
3. Press Previous or Next to change
the value.
4. Press OK to confirm the setting.
• The new setting is saved.
• The appliance returns to the basic
settings list.
5. Press and hold simultaneously
and for about 3
seconds to exit setting mode.
The appliance returns to the programme
selection.
The saved settings remain valid until you
change them again.
7. BEFORE FIRST USE
1. Fill the rinse aid dispenser.
2. Open the water tap.
3. Start the
programme to
remove any residuals from the
manufacturing process. Do not use
detergent and do not put dishes in
the baskets.
7.1 How to fill the rinse aid
dispenser
A B
C
CAUTION!
Only use rinse aid designed
specifically for dishwashers.
1. Open the lid (C).
www.aeg.com 12