AEG FSB53907Z User Manual Download Page 13

in the same cycle or at the beginning of

the next programme. This activity

increases the total water consumption of

a programme by additional 4 litres and

the total energy consumption of a

programme by additional 2 Wh. The

rinsing of the softener ends with a

complete drain.
Each performed softener rinse (possible

more than one in the same cycle) may

prolong the programme duration by

another 5 minutes when it occurs at any

point at the beginning or in the middle of

a programme.

All the consumption values

mentioned in this section are

determined in accordance

with the currently applicable

standard in laboratory

conditions with water

hardness 2.5mmol/L

according to the 2019/2022

regulation (water softener:

level 3).

The pressure and the

temperature of water as well

as the variations of the

mains supply can change

the values.

6.3 The rinse aid empty

notification

The rinse aid helps to dry the dishes

without streaks and stains. It is

automatically released during the hot

rinse phase.
When the rinse aid chamber is empty,

the rinse aid indicator is turned on

notifying to refill rinse aid. If the drying

results are satisfactory while using multi-

tablets only, it is possible to deactivate

the notification for refilling rinse aid.

However, for best drying performance,

always use rinse aid.
If standard detergent or multi-tablets

without rinse aid are used, activate the

notification to keep the rinse aid refill

indicator active.

6.4 End sound

You can activate an acoustic signal that

sounds when the programme is

completed.

Acoustic signals sound also

when a malfunction of the

appliance occurs. It is not

possible to deactivate these

signals.

6.5 AirDry

AirDry improves the drying results. The

appliance door opens automatically

during the drying phase and remains

ajar.

AirDry is automatically activated with all

programmes.
The duration of the drying phase and the

door opening time vary depending on the

selected programme and options.
When AirDry opens the door, the display

shows the remaining time of the running

programme.

CAUTION!

Do not try to close the

appliance door within 2

minutes after automatic

opening. This can cause

damage to the appliance.

CAUTION!

If children have access to

the appliance, we advise to

deactivate AirDry. The

automatic opening of the

door may pose a danger.

ENGLISH

13

Summary of Contents for FSB53907Z





























Reviews: