10
The sensor fields have to be touched
for at least 1 second before they are
activated.
Grill
How to use
Touch controls
Never turn the grill on
before the grill pan has been
put in and the grill rack is in
place. Never leave the appli-
ance unattended when
grilling or melting fat, paraf-
fin wax or other easily ignit-
ed substances.
Never leave paper, dish
cloths, aluminium foil or
any other easily ignited
materials in the immediate
vicinity of the grill. The grill
gets hot enough to ignite
flammable materials. In case
of fire, turn off all control
knobs and switch off any
cooker hood. Put out the fire
with a lid, and never use
water. Check that the grill is
turned off when not in use.
23
To optimise joints between the installed hobs, the gap between the ceramic hob
may be grouted with silicone:
1. Remove the aluminium panels from the hobs.
2. Apply a stripe of silicone to the gap between the two ceramic hob. Use only
the silicone supplied, as it is designed to tolerate the appliance’s high temper-
ature. (Fig. 1)
3. Splash a little soapy water (washing-up liquid) on the silicone stripe
4. Press the rubber block hard against the ceramic hob and pull it slowly from
back to front (Fig. 2)
5. Leave the silicone to harden until the next day.
6. Remove surplus silicone coating from the ceramic hob with the razorblade
supplied. Be careful not to damage the silicone in the gap. Run tools only
along the joint, never across it.
7. Polish the ceramic hob with the supplied cleaning product for ceramic hobs.
1
2
Summary of Contents for FM 4500GR-A
