AEG FFB41600ZW User Manual Download Page 22

12.1 The washing and drying results are not satisfactory

Problem

Possible cause and solution

Poor washing results.

• Refer to "Daily use""Hints and tips" and basket

loading leaflet.

• Use more intensive washing programmes.

• Clean spray arm jets and filter. Refer to "Care and

Cleaning".

Poor drying results.

• Tableware has been left for too long inside a closed

appliance.

• There is no rinse aid or the dosage of rinse aid is not

enough. Set the rinse aid dispenser to a higher level.

• Plastic items may need to be towel dried.

• For the best drying performance activate the option

XtraDry and set AirDry.

• We recommend to always use rinse aid, even in com‐

bination with multi-tablets.

There are whitish streaks or

bluish layers on glasses and

dishes.

• The release quantity of rinse aid is too much. Adjust

the rinse aid level to a lower level.

• The quantity of detergent is too high.

There are stains and dry water

drops on glasses and dishes.

• The released quantity of rinse aid is not sufficient. Ad‐

just the rinse aid level to a higher level.

• The quality of the rinse aid can be the cause.

The dishes are wet.

• For the best drying performance activate the option

XtraDry and set AirDry .

• The programme does not have a drying phase or has

a drying phase with low temperature.

• The rinse aid dispenser is empty.

• The quality of the rinse aid can be the cause.

• The quality of the multi-tablets can be the cause. Try a

different brand or activate the rinse aid dispenser and

use rinse aid and multi-tablets together.

The interior of the appliance is

wet.

• This is not a defect of the appliance. it is caused by

the humidity in the air that condenses on the walls.

Unusual foam during washing. • Use the detergent designed specifically for dishwash‐

ers.

• Use a detergent from a different manufacturer.

• Do not pre-rinse dishes under running water before

putting them in the appliance.

Traces of rust on cutlery.

• There is too much salt in the water used for washing.

Refer to "The water softener".

• Silver and stainless steel cutlery were placed together.

Avoid to put silver and stainless steel items close to‐

gether.

www.aeg.com

22

Summary of Contents for FFB41600ZW





























Reviews: