manualshive.com logo in svg

AEG FEB31400ZM, User Manual, Page: 9 / 20

Share
Download
AEG FEB31400ZM User Manual Download Page 9

6.3 

AirDry

AirDry improves the drying results with

less energy consumption.

While the drying phase

operates, a device opens the

appliance door. The door is

then kept ajar.

CAUTION!

Do not try to close the

appliance door within 2

minutes after automatic

open. This can cause

damage to the appliance.

AirDry is automatically activated with all

programmes excluding 

 and 

(if applicable).

CAUTION!

If children have access to the

appliance, it is advised to

deactivate AirDry as opening

the door may pose a danger.

How to deactivate AirDry

The appliance must be in programme

selection mode.

1.

To enter the user mode, press and

hold 

Delay

. At the same time turn

the knob counterclockwise until the

programme marker indicates the first

programme. Release 

Delay

 when the

indicators 

Start

 and on/off start

flashing.

2.

Turn the knob counterclockwise until

the programme marker indicates the

second programme.

• The indicator 

 shows the

current setting: on = AirDry is

activated.

3.

Press 

Delay

 to change the setting.

• If the indicator 

 is off = AirDry

is deactivated.

4.

To confirm the setting, turn the

programme knob until the

programme marker is again in on/off

position.

7. 

BEFORE FIRST USE

1. Make sure that the current level of

the water softener agrees with the

hardness of the water supply. If

not, adjust the level of the water

softener.

2.

Fill the salt container.

3.

Fill the rinse aid dispenser.

4.

Open the water tap.

5.

Start a programme to remove any

processing residuals that can still be

inside the appliance. Do not use

detergent and do not load the

baskets.

After starting a programme, it may take

up to 5 minutes for the appliance to

recharge the resin in the water softener.

It seems that the appliance is not

working. The washing phase starts only

after this procedure is completed. The

procedure is repeated periodically.

7.1 

The salt container

CAUTION!

Only use salt specifically

designed for dishwashers.

The salt is used to recharge the resin in

the water softener and to assure good

washing results in the daily use.

How to fill the salt container

1.

Turn the cap of the salt container

counterclockwise and remove it.

2.

Put 1 litre of water in the salt

container (Only for the first time).

ENGLISH

9

Summary of Contents for FEB31400ZM





















Reviews:

No comments