AEG FAVORIT45502WO, User Manual

Page: 30 / 56

CAUTION!
Only use rinse aid
specifically designed for
dishwashers.
1. Press the release button ( D ) to open
the lid ( C ).
2.
Fill the dispenser (
A
) until the rinse
aid reaches the marking ''MAX''.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4. Close the lid. Make sure that the
release button locks into position.
You can turn the selector of
the released quantity ( B )
between position 1 (lowest
quantity) and position 4 or 6
(highest quantity).
9.
DAILY USE
1. Open the water tap.
2.
Press the on/off button to activate
the appliance.
Make sure that the appliance is in
programme selection mode.
• If the salt indicator is on, fill the
salt container.
• If the rinse aid indicator is on, fill
the rinse aid dispenser.
3.
Load the baskets.
4. Add the detergent. If you use multi-
tablets, activate the option Multitab.
5. Set and start the correct programme
for the type of load and the degree
of soil.
9.1 Using the detergent
30
20
A B D
C
20
30
B A D
C
1. Press the release button ( B ) to open
the lid ( C ).
2. Put the detergent, in powder or
tablets, in the compartment (
A
).
3. If the programme has a prewash
phase, put a small quantity of
detergent in the compartment ( D ).
4.
Close the lid. Make sure that the
release button locks into position.
9.2 Setting and starting a
programme
The Auto Off function
This function decreases energy
consumption by deactivating
automatically the appliance when it is not
operating.
The function comes into operation:
• 5 minutes after the completion of the
programme.
• After 5 minutes if the programme has
not started.
www.aeg.com 30