AEG FAVORIT 99015 VI0P User Manual Download Page 13

GRAMME END and PLEASE SWITCH
OFF .

1.

Press the on/off button to deactivate
the appliance.

2.

Close the water tap.

If you do not press the on/off
button, the 

AUTO OFF

 function

automatically deactivates the ap-
pliance a few minutes after the
end of the programme.
This helps to decrease the ener-
gy consumption.

Important

• Let the dishes become cold before

you remove them from the appliance.
Hot dishes can be easily damaged.

• First remove the items from the lower

basket, then from the upper basket.

• There can be water on the sides and

on the door of the appliance. Stainless
steel becomes cool more quickly than
the dishes.

8. 

HINTS AND TIPS

8.1 

The water softener

Hard water contains a high quantity of
minerals that can cause damage to the
appliance and bad washing results. The
water softener neutralises these miner-
als.
The dishwasher salt keeps the water
softener clean and in good conditions. It
is important to set the right level of the
water softener. This makes sure that the
water softener uses the correct quantity
of dishwasher salt and water.

8.2 

Using salt, rinse aid and

detergent

• Only use salt, rinse aid and detergent

for dishwasher. Other products can
cause damage to the appliance.

• The rinse aid helps, during the last

rinsing phase, to dry the dishes with-
out streaks and stains.

• Combi detergent tablets contain de-

tergent, rinse aid and other added
agents. Be sure that these tablets are
applicable to the water hardness in
your area. Refer to the instructions on
the packaging of the products.

• Detergent tablets do not fully dissolve

with short programmes. To prevent
detergent residues on the tableware,
we recommend that you use the tab-
lets with long programmes.

Do not use more than the correct
quantity of detergent. Refer to

the instructions on the detergent
packaging.

8.3 

What to do if you want to

stop using the combi
detergent tablets

1.

Set the water softener to the highest
level.

2.

Make sure that the salt container and
the rinse aid dispenser are full.

3.

Start the shortest programme with a
rinsing phase, without detergent and
without dishes.

4.

Adjust the water softener according
to the water hardness in your area.

5.

Adjust the released quantity of rinse
aid.

8.4 

Loading the baskets

Refer to the supplied leaflet with
examples of the load of the bas-
kets.

• Only use the appliance to wash items

that are dishwasher-safe.

• Do not put in the appliance items

made of wood, horn, aluminium, pew-
ter and copper.

• Do not put in the appliance items that

can absorb water (sponges, household
cloths).

• Remove remaining food from the

items.

ENGLISH

13

Summary of Contents for FAVORIT 99015 VI0P





















Reviews: