AEG FAVORIT 99009 M0P, User Manual, Page: 29 / 72

7. DAILY USE
1. Open the water tap.
2. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode, refer
to ’Setting and starting a pro-
gramme’.
• If the salt indicator is on, fill the salt
container.
• If the rinse aid indicator is on, fill
the rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
• If you use the combi detergent
tablets, activate the Multitab op-
tion.
5. Set and start the correct programme
for the type of load and the degree
of soil.
7.1 Using the detergent
20
30
M AX
1
2
3
4
+
-
A B
C
1. Press the release button ( B ) to open
the lid ( C ).
2. Put the detergent in the compart-
ment (
A ) .
3. If the programme has a prewash
phase, put a small quantity of deter-
gent on the inner part of the appli-
ance door.
4. If you use detergent tablets, put the
tablet in the compartment (
A ).
5.
Close the lid. Make sure that the re-
lease button locks into position.
7.2 Setting and starting a
programme
Starting a programme without
delay start
1. Open the water tap.
2. Press the on/off button to activate
the appliance.
3. Close the appliance door.
4. Set the programme and options
5. Press the start touchpad, the pro-
gramme starts.
• The start of the programme does
not automatically occur if the salt
container and the rinse aid dis-
penser are empty. The related
messages show in the display.
Press the start touchpad again.
Starting a programme with
delay start
1. Set the programme and the options.
2. Set the delay start.
3. Press the start touchpad, the count-
down starts.
• The start of the countdown does
not automatically occur if the salt
container and the rinse aid dis-
penser are empty. The related
messages show in the display.
Press the start touchpad again.
• When the countdown is completed,
the programme starts.
Opening the door while the
appliance operates
If you open the door, the appliance
stops. When you close the door, the ap-
pliance continues from the point of inter-
ruption.
Cancelling the delay start
while the countdown operates
1. Press the start touchpad.
2. The display shows how to operate to
cancel the delay start.
ENGLISH
29