AEG Favorit 87000 User Manual Download Page 11

Use of dishwasher salt

Do these steps to fill the salt container:

1. Turn the cap counterclockwise to open

the salt container.

2. Fill the salt container with 1 litre of water

(only with the first operation).

3. Use the funnel to fill the salt container

with salt.

4. Remove the salt around the opening of

the salt container.

5. Turn the cap clockwise to close the salt

container.

It is correct that water comes out from the salt

container when you fill it with salt.

Use of detergent and rinse aid

20

30

MAX

1

2

3

4

+

-

1

2

3

4

5

6

7

Use of detergent

To help the environment, do not use more than the correct quantity of detergent.

Follow the detergent manufacturer recommendations on the detergent packaging.

Do these steps to fill the detergent dispenser:

1. Press the release button 

2

 to open the lid 

7

 of the detergent dispenser.

2. Put the detergent in the dispenser 

1

 .

3. If the washing programme has a prewash phase, put a small quantity of detergent on

the inner part of the appliance door.

4. If you use the detergent tablets, put the tablet in the detergent dispenser 

1

 .

5. Close the detergent dispenser. Press the lid until it locks into position.

Use of dishwasher salt

11

Summary of Contents for Favorit 87000

























Reviews: