manualshive.com logo in svg

AEG FAVORIT 86070 VI, User Instructions, Page: 9 / 52

Share
Download
AEG FAVORIT 86070 VI User Instructions Download Page 9

Operating Instructions

9

Display and control field 

The 

Programme buttons

 are used to select the desired dishwashing cy-

cle.

Function buttons:

 In addition to the dishwashing cycle and/or start 

delay selected, the following functions can also be set with the help of 
these buttons: 

The multi-display

 can indicate:

– the level of hardness to which the water softener is set.
– whether the rinse aid inflow has been activated/deactivated.
– whether the acoustic signal has been activated/deactivated.
– the start delay that has been set.
– the estimated time remaining for the current dishwashing cycle.
– what type of error has occurred with the dishwasher.

Function button 

1

Set water softener

Function button 

2

Activate/deactivate rinse aid inflow

Function button 

3

Activate/deactivate acoustic signal

Function button 

4

- not programmed -

Multi-display

Set start delay

Control Indicators

ON/OFF button

Control Indicators

1

2

3

4

Programme buttons 

Function buttons

Summary of Contents for FAVORIT 86070 VI





















































Reviews:

No comments