Operating instructions
10
Prior to using for the first time
Before using your dishwasher for the first time:
1.
Ensure that the electrical and water connections comply with the
installation instructions
2.
Remove all packaging from inside the appliance
3.
Set the water softener
4.
Pour 1 litre of water inside the salt container and then fill with
special dishwasher salt.
5.
Fill the rinse aid dispenser.
Setting the water softener
The dishwasher is equipped with a water softener designed to remove
minerals and salts from the water supply, which would have a
detrimental or adverse effect on the operation of the appliance.
The higher the content of these minerals and salts, the harder your
water is. Water hardness is measured in equivalent scales, German
degrees, French degrees and mmol/l (millimol per litre).
The softener should be adjusted according to the hardness of the water
in your area. Your local Water Authority can advise you on the
hardness of the water in your area.
The water softener must be set in both ways: manually, using the water
hardness dial and electronically, using the function push buttons on
the control panel.
Adjusting the water
hardness setting
10
9
8
7
6
10
9
8
7
6
3
3
1
no salt
necessary
1
Manually Electronically
2
1
Number
of audible
signals
2
2
Water hardness
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
9,0 - 12,5
7,6 - 8,9
6,5 - 7,5
5,1 - 6,4
4,0 - 5,0
IV
11 - 14
1,9 - 2,5
II
< 4
< 0,7
I
4 - 10
0,7 - 1,8
I/II
19 - 22
15 - 18
3,3 - 3,9
2,6 - 3,2
III
5
4
5
4
Level indica-
ted in the
digital dis-
play
°dH
(german de-
grees)
91 - 125
76 - 90
65 - 75
51 - 64
40 - 50
19 - 25
< 7
7 - 18
33 - 39
26 - 32
°TH
(french degrees)
mmol/l
(millimol per litre, inter-
national unit for the
hardness of water)
Range
152963030en per uk.qxp 25/03/2004 15.33 Pagina 10