9.
DAILY USE
1.
Open the water tap.
2.
Press the on/off button to activate
the appliance.
Make sure that the appliance is in
programme selection mode.
• If the rinse aid indicator is on, fill
the rinse aid dispenser.
3.
Load the baskets.
4.
Add the detergent.
5.
Set and start the correct programme
for the type of load and the degree
of soil.
9.1
Using the detergent
A
B
C
CAUTION!
Only use detergent
specifically designed for
dishwashers.
1.
Press the release button (
A
) to open
the lid (
C
).
2.
Put the detergent, in powder or
tablets, in the compartment (
B
).
3.
If the programme has a prewash
phase, put a small quantity of
detergent on the inner part of the
appliance door.
4.
Close the lid. Make sure that the lid
locks into position.
9.2
Setting and starting a
programme
The Auto Off function
This function decreases energy
consumption by deactivating
automatically the appliance when it is not
operating.
The function comes into operation:
• 5 minutes after the completion of the
programme.
• After 5 minutes if the programme has
not started.
Starting a programme
1.
Keep the appliance door ajar.
2.
Press the on/off button to activate
the appliance. Make sure that the
appliance is in programme selection
mode.
3.
Press repeatedly
until the display
shows the number of the programme
you want to start. The display will
show the programme number for
approximately 3 seconds and then
show the programme duration.
4.
Set the applicable options.
5.
Close the appliance door to start the
programme.
Starting a programme with
delay start
1.
Set a programme.
2.
Press
again and again until the
display shows the delay time you
want to set (from 1 to 24 hours).
The delay indicator comes on.
3.
Close the appliance door to start the
countdown.
While a countdown is running it is
possible to increase the delay time but
not to change the selection of the
programme and options.
When the countdown is completed, the
programme starts.
Opening the door while the
appliance operates
If you open the door while a programme
is running, the appliance stops. It may
affect the energy consumption and the
programme duration. When you close
the door, the appliance continues from
the point of interruption.
www.aeg.com
12
